No products in the cart.

Registration

Login

Product was successfully added to your shopping cart.

5

Product was successfully added to your compare list.

5

Product was successfully added to your wishlist.

5

New CHEVROLET/GM 6.2L V8 VORTEC L94 06-14 - GEN 1V, BARE LONG ENGINE

Ask Product Qustion.

Engine Specifications
Type: 6.2L V8 Vortec L94 Gen IV Small Block
Displacement: 6162cc (376 ci)
Compression ratio: 10.4:1
Firing order: 1“ 8“ 7“ 2“ 6“ 5“ 4“ 3
Bore x Stroke: 103.25 x 92mm 

SKU: New CHEVROLET/GM 6.2L V8 VORTEC L94 06-14 - GEN 1V

Categories: Car Engine, Chevrolet Parts

Description :

CHEVROLET/GM 6.2L V8 VORTEC L94 - GEN 1V, BARE LONG ENGINE- AFM

2006-2014

THIS WAS AN EX FACTORY TEST ENGINE.

STRIPPED AND CHECKED, NEW BEARINGS, RINGS, GASKETS AND HEAD BOLTS USED.

HEADS HAVE HAD TEMP/PRESSURE PROBES TAPPED INTO EACH CYLINDER.

BLOCK CASTING# 12584724.

Engine Specifications

Type: 6.2L V8 Vortec L94 Gen IV Small Block
Displacement: 6162cc (376 ci)
Compression ratio: 10.4:1
Firing order: 1“ 8“ 7“ 2“ 6“ 5“ 4“ 3
Bore x Stroke: 103.25 x 92mm
Bore Centre (mm): 111.76
Fuel type: Premium Recommended, not Required and E85 Flex Fuel
Maximum Engine Speed: 6000 RPM
Horsepower hp (kw)
Cadillac Escalade: 403 hp (301 kW) @ 5700 RPM SAE Certified
Cadillac Escalade ESV: 403 hp (301 kW) @ 5700 RPM SAE Certified
GMC Yukon Denali: 403 hp (301 kW) @ 5700 RPM SAE Certified
GMC Yukon XL Denali: 403 hp (301 kW) @ 5700 RPM SAE Certified
Torque lb.-ft. (Nm)
Cadillac Escalade: 417 lb.-ft. (565 Nm) @ 4300 RPM SAE Certified
Cadillac Escalade ESV: 417 lb.-ft. (565 Nm) @ 4300 RPM SAE Certified
GMC Yukon Denali: 417 lb.-ft. (565 Nm) @ 4300 RPM SAE Certified
GMC Yukon XL Denali: 417 lb.-ft. (565 Nm) @ 4300 RPM SAE Certified

E85 Flex Fuel
Active Fuel Management (AFM)
Electronic throttle control
Oil Life Monitor System
Variable Valve Timing (VVT)

No Review for "New CHEVROLET/GM 6.2L V8 VORTEC L94 06-14 - GEN 1V, BARE LONG ENGINE"

Be the first to review this product

Write Your Own Review

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Subscribe